PLA

Description

Properties	Test Method	Test Condition	Units	Typical Values
Physical
Melt Flow Rate	ASTM D-1238	220oC, 10Kg	g/10min	-
Specific Gravity	ASTM D-792	23oC	g/cm3	1.03
Ash	-	800oC,30min	%	-
Mechanical
Tensile Strength	ASTM D-638	50mm/min	MPa	46
Elongation at Break	ASTM D-638	50mm/min	%	14
Flexural Strength	ASTM D-790	2mm/min	MPa	62
Flexural Modulus	ASTM D-790	2mm/min	MPa	1800
Impact Strength, IZOD non-notched	ASTM D-256	23oC	KJ/m2	-
		-30oC	KJ/m2	-
Impact Strength, IZOD notched	ASTM D-256	23oC	KJ/m2	17
		-30oC	KJ/m2	-
Thermal
Heat Deflection Temp.	ASTM D-648	1.8Mpa	oC	93
		0.45Mpa	oC	98
Others
Mold Shrinkage	ASTM D-955	23oC	%	0.6-0.9
Flammability	UL94	1/16"		HB

Company Profile

Previous: ← ABS
Next : HIPS →

Products